Nugen Reactor - Revision history

CourseDirector at 22:40, 26 December 2018

2018-12-26T22:40:35Z

← Older revision		Revision as of 22:40, 26 December 2018
Line 95:		Line 95:
	==Errata==		==Errata==
	Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.		Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.

			[[Category:Course Books]]

Siddharth1: /* Core Production */

2017-06-08T01:41:07Z

Core Production

← Older revision		Revision as of 01:41, 8 June 2017
Line 91:		Line 91:

	==Core Production==		==Core Production==
	All of Nugen Core production and disposal is handled by [[Pleasant Company]], Inc, a division of [[Consolidated Power]], who manage energy concerns for the [[Foundation]].		All of Nugen Core production and disposal is handled by [[Pleasant Company]], Inc., a division of [[Consolidated Power]], who manage energy concerns for the [[Foundation]].

	==Errata==		==Errata==
	Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.		Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.

CourseDirector: /* Core Installation and Replacement */

2017-06-07T18:34:47Z

Core Installation and Replacement

← Older revision		Revision as of 18:34, 7 June 2017
Line 80:		Line 80:
	===Core Module===		===Core Module===
	Larger ships running larger cores use a Core Module desgin, where in most of the power generating capability is housed in seperate blocks, while the core itself, as well as the containment vessel and shielding are containted in a discreet element. The Core module can be isolated usually by closing a series of valves. Of course the high-presure pipes must also be cut to remove the module.		Larger ships running larger cores use a Core Module desgin, where in most of the power generating capability is housed in seperate blocks, while the core itself, as well as the containment vessel and shielding are containted in a discreet element. The Core module can be isolated usually by closing a series of valves. Of course the high-presure pipes must also be cut to remove the module.

			==Operational Lifespan==
			Every Nugen Core is designed to have a specific, set operational lifespan, after which it becomes inert. Once this happens, there is no way to reverse the rocess, the core must be replaced. Lifespan is limited by size and dictated by operational usage. In every care, the time span is a minimum of five years and a maximum of fifty.

			Large capital ships such as carriers and battlecruisers use fifty-year fixed cores. Carriers, in particular, have very well-defined, predicable energy consumption needs. Smaller battleships can also operate fixed cores, and are preferred; however the inability to produce much additional power on demand makes them disliked by captains. Larger vessels can optionally fit additional steam turbines to produce more power. Fixed cores on larger ships are always fifty-year cores.

			Dreadnaughts or often required to use variable cores, which means they must be changed more frequently. It has been concluded that the use of variable core output, even if operated at maximum, can only decrease the cores lifespan by at most 40%. However, additional factors, such as external radiation, can impact core-life, as such cores are replaced every twenty-five years, regardless of usage-history. Captains are discouraged from utilizing core-compression, except in times of war.

			Smaller vessels have cor sizes and lengths determined by ship size and operational lifespan. Typically, the larger the ship, the longer the core. Cruisers prefer a twenty to twenty-five year span, destroyers are generally fifteen, firgates and cutters ten. In some special applications, such as fast attack ships, small, high-density, short lifespan cores are constructed, sacrificing longevity for output.

	==Core Production==		==Core Production==

CourseDirector: /* Core Installation and Replacement */

2017-06-07T18:17:39Z

Core Installation and Replacement

← Older revision		Revision as of 18:17, 7 June 2017
Line 71:		Line 71:
	Nugen Cores are installed as late in the construction process as possible to provide for maximum life span. On smaller ships, the vessel is usually designed to make removing the core as simple as possible. The core cannot be "ejected", and the ship usually has to be significantly dismantled in order to reach the core. This frequnetly involves cutting through external plating and armor, though most ships are designed with strategic passages through the [[Starship Terminology#Super Structure\|super structure]] so that nothing important is compromised.		Nugen Cores are installed as late in the construction process as possible to provide for maximum life span. On smaller ships, the vessel is usually designed to make removing the core as simple as possible. The core cannot be "ejected", and the ship usually has to be significantly dismantled in order to reach the core. This frequnetly involves cutting through external plating and armor, though most ships are designed with strategic passages through the [[Starship Terminology#Super Structure\|super structure]] so that nothing important is compromised.

	Most ship designs have		Most ship designs have either a "Core Module" or a "Reactor Block.

			===Reactor Block===
			The block design is most common in smaller ships; in this case the entire power generator, the core, heat loops, steam turbines, etc, are contained in a single "block" or structure. Usually the condensers, which turn steam back into water, are separate. Cooling water usually involves several stages of heat-exchange which return excess energy to the core.

			Comercial vessels usually use a heater exchanger that vents the excess heat into space.

			===Core Module===
			Larger ships running larger cores use a Core Module desgin, where in most of the power generating capability is housed in seperate blocks, while the core itself, as well as the containment vessel and shielding are containted in a discreet element. The Core module can be isolated usually by closing a series of valves. Of course the high-presure pipes must also be cut to remove the module.

	==Core Production==		==Core Production==

CourseDirector: /* Core Installation and Replacement */

2017-06-07T00:41:57Z

Core Installation and Replacement

← Older revision		Revision as of 00:41, 7 June 2017
Line 69:		Line 69:

	==Core Installation and Replacement==		==Core Installation and Replacement==
	Nugen Cores are installed as late in the construction process as possible to provide for maximum life span. On smaller ships, the vessel is usually designed to make removing the core as simple as possible. The core cannot be "ejected"		Nugen Cores are installed as late in the construction process as possible to provide for maximum life span. On smaller ships, the vessel is usually designed to make removing the core as simple as possible. The core cannot be "ejected", and the ship usually has to be significantly dismantled in order to reach the core. This frequnetly involves cutting through external plating and armor, though most ships are designed with strategic passages through the [[Starship Terminology#Super Structure\|super structure]] so that nothing important is compromised.

			Most ship designs have

	==Core Production==		==Core Production==

CourseDirector: /* Reactor Impact */

2017-06-06T18:55:37Z

Reactor Impact

← Older revision		Revision as of 18:55, 6 June 2017
Line 67:		Line 67:

	Variable cores are es[pecially vulnerable, as the use of "high power mode" in such a core also reduces the lifespan, though more predictably. To combat this, the Foundation instituted the "twenty/fifty" rule, which states that fixed cores should be replaced when twenty percent of their operational lifespan has been reached, and variable cores at fifty percent. Since Nugen Cores are entirely recyclable(albeit at high material and labor costs), this is not a serious issue. The numbers also offer a high margin for error, in the even a ship cannot be refit.		Variable cores are es[pecially vulnerable, as the use of "high power mode" in such a core also reduces the lifespan, though more predictably. To combat this, the Foundation instituted the "twenty/fifty" rule, which states that fixed cores should be replaced when twenty percent of their operational lifespan has been reached, and variable cores at fifty percent. Since Nugen Cores are entirely recyclable(albeit at high material and labor costs), this is not a serious issue. The numbers also offer a high margin for error, in the even a ship cannot be refit.

			==Core Installation and Replacement==
			Nugen Cores are installed as late in the construction process as possible to provide for maximum life span. On smaller ships, the vessel is usually designed to make removing the core as simple as possible. The core cannot be "ejected"


			==Core Production==
			All of Nugen Core production and disposal is handled by [[Pleasant Company]], Inc, a division of [[Consolidated Power]], who manage energy concerns for the [[Foundation]].

	==Errata==		==Errata==
	Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.		Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.

CourseDirector: /* External Radiation Concerns */

2017-06-06T18:51:22Z

External Radiation Concerns

@@ Line 55: / Line 55: @@
 Reactors are further placed as close to the middle of a ship as possible, so that the hull armor and other interior spaces provide protection.
 ==Errata==
 Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.

CourseDirector: /* External Radiation Concerns */

2017-06-05T20:48:25Z

External Radiation Concerns

← Older revision		Revision as of 20:48, 5 June 2017
Line 50:		Line 50:

	==External Radiation Concerns==		==External Radiation Concerns==
			The greatest danger to a NuGen Reactor is external radiation, specifically external neutron bombardment. The core elements are carefully engineered around a precise reaction; the introduction of external neutron sources changes this reaction. This is, of course, especially a problem with warships, which tend to have nuclear weapons fired at them.

			For this reason, the reactor core is very heavily shielded. Not to protect the crew from it, but to protect it from external radiation. The core itself is imersed in water already, with a second large, un-pressurized reservoir around it(that is, pressurized to the same air pressure as the ship's interior, not pressurized the same way as the core itself). Reactor operations then spiral out around the core, with steam tubes and cold-water returns used to add additional protection. Finally, thick plates of dense shielding are used.

			Reactors are further placed as close to the middle of a ship as possible, so that the hull armor and other interior spaces provide protection.

	==Errata==		==Errata==
	Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.		Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.

CourseDirector: /* Variable Core Design */

2017-06-05T20:39:28Z

Variable Core Design

← Older revision		Revision as of 20:39, 5 June 2017
Line 40:		Line 40:

	==Variable Core Design==		==Variable Core Design==
	Nugen Cores come in two varieties: fixed and variable. A fixed core is sealed in cladding and has only one power output level. A variable core has a number of large gaps in the cladding, filled by large zircons. Mechanical pressure is applied to these, with increase the pressure at the reactor's core. This can increase the reactor's output by about ~~1/3rd, maximum~~.		Nugen Cores come in two varieties: fixed and variable. A fixed core is sealed in cladding and has only one power output level. A variable core has a number of large gaps in the cladding, filled by large zircons. Mechanical pressure is applied to these, with increase the pressure at the reactor's core. This can increase the reactor's output by about 30%.

	In a variable core, small amounts of fissile material leak through the gaps in the cladding, and so the core coolant becomes radioactive. A primary, isolated heat loop then becomes a requirement, and radiation protocols in the reactor block must be strictly observed.		In a variable core, small amounts of fissile material leak through the gaps in the cladding, and so the core coolant becomes radioactive. A primary, isolated heat loop then becomes a requirement, and radiation protocols in the reactor block must be strictly observed. Very large vessels powered by variable cores often have a third heat loop for steam generation, as some radiative crossover between the first and second loops is possible.

			Variable cores are at a higher risk of breach and require much more skill to operate. The old adage among the Crimson blade is "You need a plumber to operate a fixy, and a sir to operate a vari." ("fixy" is a colloquialism for a fixed core, "vari" is the same for a variable core, as well as being a double entendre: vari sounds like very as in "they are very complicated". The reference to a "sir" refers to the fact that nuclear-trained reactor technicians are officers, having attended an academy and earned the equivalant of an under-graduate degree in nuclear physics).

			===Hydrogen Outburst===
			Another serious concern for variable reactors is the production of free hydrogen. The reactor cladding is inert at normal operating temperatures of around 932 degrees, and remains so at the higher temperatures achieved by "full compression" of the core. However, at around 1500 degrees, the amaterial begins to react with the water and produce free hyodrogen, the pressure build-up can breach the reactor housing. Venting coolant removes the hydrogen, but there is still a danger to the core itself. Even variable cores are not thought to be at risk for a full-on, catastrophic melt-down in this scenario, but core breaches and other dangerous situations are possible.

			==External Radiation Concerns==

	==Errata==		==Errata==
	Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.		Part of [[The Furthest Star]] states that the Nugen Reactor is chemical. Since this story has never been published, that is getting changed.

CourseDirector at 23:33, 2 June 2017

2017-06-02T23:33:40Z

← Older revision		Revision as of 23:33, 2 June 2017
Line 26:		Line 26:
	Since a Nugen reactor is always "on", the system has to be made inert or rendered "safe" by draining the coolant and taking steps to ensure that dangerous amounts of heat do not dissipate through the ship and cause damage to other systems. For short-term work, such as a system re-fit, the core is isolated and exposed to the vacuum of space. The layer of hard-vacuum around the core effectively insulates it from the rest of the ship, as vacuum is a very poor heat conductor.		Since a Nugen reactor is always "on", the system has to be made inert or rendered "safe" by draining the coolant and taking steps to ensure that dangerous amounts of heat do not dissipate through the ship and cause damage to other systems. For short-term work, such as a system re-fit, the core is isolated and exposed to the vacuum of space. The layer of hard-vacuum around the core effectively insulates it from the rest of the ship, as vacuum is a very poor heat conductor.

	In the case of longer-term shutdown, inert gas fills the chamber, with a passive cooling system to vent heat out into space. These systems require routine checks, but no little maintenance is required.		In the case of longer-term shutdown, inert gas fills the chamber, with a passive cooling system to vent heat out into space. These systems require routine checks, but no little maintenance is required. If the passive system fails, heat from the core can easily spread. Most areas around the core are made from heat-safe components, but wires and workstation components can melt. In rare cases, materials outside the core can be heated to the point of auto-ignition, so fire-safety is strictly enforced in areas around the core.

			The greatest incidence of core breach happens during improperly executed startup routines. The cladding on the core will not melt, but is highly susceptible to heat fracture. The core puts out a constant 932 degrees, so liquid water cannot be introduced directly. Instead, the start-up routine involves pumping high-pressure steam into the system until it reaches sufficiently levels that the water can then liquefy.

			A "from vacuum" start-up can take days, and up to a week on larger ships, and requires a large amount of power. An emergency start-up procedure, called "re-profusing the system" exists that involves adding liquid water elsewhere in the heat loop and using the vacuum of space to boil it. Once some water vapor is in the system, more liquid water is added, and the core can transfer heat energy to this through the existing steam. However, if any liquid water comes into contact with the core, it can weaken or even breach the cladding.

			Breaches on shutdown are extremely rare, as the standard shutdown procedure involves venting the core coolant into space. The sudden vacuum conducts very little heat, so the change in temperature is minimal. However, in the event of a coolant leak, this can allow cool air from the ship to rush past the core. In the event that the system is damaged, the standard procedure is to evacuate the reactor block and vent the entire section.

	==Cooling Systems==		==Cooling Systems==
	The reactor core is cooled water. Nuetron moderation is handled internally to the core. On smaller ships, the reactor is a direct boiling-water reactor with a single heat loop. That is, the water surrounding the core is allowed to boil into steam. Larger vessels use a heat loop where one amount of coolant, kept at high pressure, surrounds the core, then transfers heat to another which boils. This method is more efficient for		The reactor core is cooled water. Nuetron moderation is handled internally to the core. On smaller ships, the reactor is a direct boiling-water reactor with a single heat loop. That is, the water surrounding the core is allowed to boil into steam. Larger vessels use a heat loop where one amount of coolant, kept at high pressure, surrounds the core, then transfers heat to another which boils. This method is more efficient for extracting maximum power from a larger core.

			The reactor cooling system is also often linked to the plasma cooling system. That is, waste heat from the engines is introduced to the reactor so that some power can be generated from it. In the event of a core isolation event, this system can sometimes transfer enough heat to provide electrical power to the ship. It is also not uncommon to use the ship's engines to heat the core coolant during a restart procedure.

			==Variable Core Design==
			Nugen Cores come in two varieties: fixed and variable. A fixed core is sealed in cladding and has only one power output level. A variable core has a number of large gaps in the cladding, filled by large zircons. Mechanical pressure is applied to these, with increase the pressure at the reactor's core. This can increase the reactor's output by about 1/3rd, maximum.

			In a variable core, small amounts of fissile material leak through the gaps in the cladding, and so the core coolant becomes radioactive. A primary, isolated heat loop then becomes a requirement, and radiation protocols in the reactor block must be strictly observed.